Heat-shrink cap KTk22/8 35kW

Ofertă disponibilă
Magazin	Preț	Ofertă
Magazin 1	2,72 lei	Vezi oferta

🔔 Anunță-mă când scade prețul

Prețurile sunt actualizate zilnic, dar pot apărea diferențe din motive tehnice între prețul afișat aici și cel de la magazin. Prețul final, stocul exact, livrarea și returul le afli cu click pe butonul „Vezi oferta”.

Caracteristici

Material	plastic
Brand	Iek
Categorie	Cabluri și tuburi

Descriere

Used for sealing of ends of power cables with paper oil-impregnated insulation, plastic insulation and cross-linked polyethylene insulation, steel and polyethylene pipes. Inner surface of the cap is coated with adhesive thermomelting layer that ensures perfect sealing after shrinkage. The inner surface of the cap is coated with a layer of hot melt glue, which provides complete sealing of the cable ends after shrinkage.

Caps are resistant to ultraviolet light and any weather conditions. The use of cable caps can significantly save time when preparing the cable for installation, eliminating the need to check the insulation for moisture. Caps can be used as plugs of steel and polymer pipes.

Inner diameter before heat-shrink	22
Type	EV004267 Inner diameter after heat-shrink: 8
Model	EV009930
Shrink rate	EV009535 Total length after shrink: 55
Nominal cross section	-
Operation temperature	-55...+125
Colour	EV000206
Material	EV000154
Mounting temperature	-10...+50
Tensile strength	≥ 13
Volumetric electrical resistance	≥ 1х10^16 For dielectric strength up to: ≥ 30 Min shrinkage start temperature: 110 Min full shrinkage temperature: 150 Thickness of adhesive layer after full thermus: 2,8 Width of glue layer: 30